Speed Dialing, Personal - Panasonic KX-NS1000 Feature Manual

Toll Restriction (TRS) checks only the dialed telephone number excluding the Special Carrier Access code.
(® 19.1.5 TRS (Toll Restriction))
•
ARS
A pause is not automatically inserted between the user-dialed access code and the subsequent digits when
ARS mode is enabled. (® 2.1.3 ARS (Automatic Route Selection))
•
If this PBX is installed behind an existing host PBX:
A Special Carrier Access code and a Host PBX Access code should be assigned separately—these codes
cannot be assigned together as one code. (® 9.1.5 Host PBX Access Code (Access Code to the
Telephone Company from a Host PBX))
PC Programming Manual References
15.3 PBX Configuration—[7-3] TRS—Special Carrier
Feature Manual References
2.1.3 ARS (Automatic Route Selection)
23.1 Capacity of System Resources

18.1.9 Speed Dialing, Personal

Description
An extension user can make calls using abbreviated dialing for frequently dialed numbers which are stored in
the extension's Personal Speed Dialing.
Personal Speed Dialing is also known as Station Speed Dialing.
Conditions
[General]
•
Any number, such as a telephone number or feature number, can be stored in Speed Dialing. A name can
be assigned to each Personal Speed Dialing number through personal programming, and also to each
System Speed Dialing number.
•
Call Directory—Speed Dialing
Display proprietary telephone (PT) users can make a call by selecting a stored name shown on the display.
•
Display Lock
An extension user can lock the Personal Speed Dialing number display to prevent the numbers from being
viewed at any extension through personal programming (Display Lock). In this case, the Incoming/Outgoing
Call Log displays are also locked, and the voice messages in the user's mailbox cannot be played back.
An extension personal identification number (PIN) is required to use this feature. (® 6.1.10 Extension PIN
(Personal Identification Number))
[Name Display on CO Line Calls]
•
When a CO line call is made using Personal Speed Dialing, if a name is registered to the Personal Speed
Dialing entry, the name is displayed on the second line of a display PT's LCD. The name is not displayed
on a phone with a one line LCD.
•
After a CO line call is made using Personal Speed Dialing, if Connected Name Identification Presentation
(CONP) information is returned, the name registered in the CONP information takes precedence over the
Personal Speed Dialing name and is displayed on a display PT's LCD. (® 15.1.20 Private Network
Features—QSIG—CLIP/COLP (Calling/Connected Line Identification Presentation) and CNIP/CONP
(Calling/Connected Name Identification Presentation))
Document Version 2016-03
18.1.9 Speed Dialing, Personal
Feature Manual 359