Panasonic KX-NS1000 Feature Manual page 389

Connecting to the Unified Messaging system (including using features such as Two-way Recording)
requires a certain number of DSP resources. If all DSP resources are in use, this operation cannot be
performed. To ensure a minimum level of performance, DSP resources can be reserved for Unified
Messaging operations. (® 5.1.18 DSP Resource Usage)
Notice
Reserving resources for Two-way Recording (® 20.1.9 Unified Messaging—Automatic Two-way
Recording for Manager, ® 20.1.90 Unified Messaging—Two-way Record/Two-way Transfer) reserves
the necessary number of UM ports exclusively for Two-way Recording. For example, if 2 UM ports (the
default) are available and you reserve resources for 2 Two-way Recording sessions, both UM ports
will be reserved for Two-way Recording, and the Unified Messaging system will not be available for
other uses.
Two-way Recording
UM
Port 1
Reserved (Two-way)
To provide access to the Unified Messaging system in this case, either the number of UM ports must
be increased or the number of resources reserved for Two-way Recording must be lowered.
•
Installing KX-NSU102 or KX-NSU104 (Unified Messaging Activation Key) increases the number of
available UM ports at a PBX (maximum: 30). In a One-look network, these keys are required at each PBX
whose number of UM ports is to be increased. For the number of available UM ports of other KX-NS series
PBXs (e.g., KX-NS700) connected to a One-look network as Slave units, refer to the corresponding
manuals.
Installation Manual References
4.3.2 Storage Memory Card (installed by default), Storage Memory S Card (KX-NS0135), Storage Memory
M Card (KX-NS0136), Storage Memory L Card (KX-NS0137)
5.10 Configuration of Users
PC Programming Manual References
9.7 PBX Configuration—[1-1] Configuration—Slot—UM Port Property
10.5 PBX Configuration—[2-5] System—Holiday Table
10.9 PBX Configuration—[2-9] System—System Options—Option 9
11.7 PBX Configuration—[3-7] Group—UM Group
23.4 UM Configuration—[4-4] Service Settings—Holiday Table
Operating Manual References
1.6 Unified Messaging Features
Document Version 2016-03
Incoming Call
UM
Port 2
Reserved (Two-way)
UM Group
20.1.2 UNIFIED MESSAGING FEATURES
Feature Manual 389