Unified Messaging-Call-Through Service; Unified Messaging-Class Of Service (Cos) - Panasonic KX-NS1000 Feature Manual

Operating Manual References
Subscriber Operation
1.6.6 Other Features—
Manager Operation
2.2.1 System Manager Features—
2.2.2 Message Manager Features—
20.1.22 Unified Messaging—Call-through Service
Description
Allows subscribers to make outside calls by accessing the subscriber service menu (from an outside telephone)
and dialing an outside destination. This creates a CO line-to-CO line call.
PC Programming Manual References
21.1 UM Configuration—[2] Class of Service—
24.4 UM Configuration—[5-4] System Parameters—Parameters—Transfer to Outside—
Sequence—Call Transfer to Outside Sequence (Up to 16 digits / [0-9 * # D F R T , ; N])
Feature Manual References
5.1.10 DISA (Direct Inward System Access)
Operating Manual References
Subscriber Operation
1.6.6 Other Features—
20.1.23 Unified Messaging—Class of Service (COS)
Description
Each mailbox is assigned a Class of Service (COS) that determines the set of services that are available to its
subscriber.
Mailboxes can be assigned to their own or to the same COS as needed. COS No. 513 and 514 are assigned
by default to the Message Manager and to the System Manager, respectively. No other mailboxes can be
assigned to COS No. 513 and 514.
Conditions
•
The System Administrator (using a PC) and the System Manager (using a telephone) can change COS
assignments.
PC Programming Manual References
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting—
Section 21 UM Configuration—[2] Class of Service
Document Version 2016-03
Personal Caller Name Announcement
Setting Class of Service (COS) Parameters
Recording Messages—To record system caller names
Call-through Service
Call-through Service
20.1.23 Unified Messaging—Class of Service (COS)
Class of Service (Mailbox)
Outside Transfer
Feature Manual 399