Panasonic KX-NS1000 Feature Manual page 26

2.1.3 ARS (Automatic Route Selection)
® 16.5 PBX Configuration—[8-5] ARS—Carrier—Carrier—
[Command Explanation]
Command
C Inserts the Carrier Access Code
H Inserts the user-dialed number minus any removed digits
P Analog Line: Inserts a pause
ISDN/T1 Line: Inserts a pause and changes dialing mode to tone (DTMF)
A Inserts the Authorization Code for Tenant
G Inserts the Authorization Code for Trunk Group
I Inserts the Itemized Billing Code
[0–9, , #] You can enter any of these digits in a modify command
[Programming Example: Carrier Table]
Carrier Name *1
Trunk Group
*2
Carrier Access Code
Removed No. of Digits
Modify Command
CLIP Table No.
In this example
Dialed number: 9-1-212-555-5555
Modification:
9
CO Line Access no. is ignored
CLIP: 0234567861
® 16.5 PBX Configuration—[8-5] ARS—Carrier—Carrier—
*1
® 16.5 PBX Configuration—[8-5] ARS—Carrier—TRG 01–TRG 96
*2
*3 ® 16.5 PBX Configuration—[8-5] ARS—Carrier—Carrier—
*4 ® 16.5 PBX Configuration—[8-5] ARS—Carrier—Carrier—
*5 ® 16.5 PBX Configuration—[8-5] ARS—Carrier—Carrier—
Note
•
If the ARS Itemized Code is set to be sent as a CLIP with ARS, the following settings are prioritized
and used as the CLIP.
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Option
1— ARS Itemized Code
12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings—Option
1— ARS Itemized Code
26 Feature Manual
Description
Carrier 1 Carrier 2
Carrier A Carrier J
1, 2, 3
*3 0880 0700
*4
1
*5
CH CPH
2
1 2125555555
Remove 1 digit
CLIP Table No.
Ext. 1001
CLIP No.
4
1
2
3
3
1
8
0880 2125555555
Add the Carrier Access Code
Carrier Name
Carrier Access Code
Removed Number of Digits
Modify Command
CLIP
0123456789
0234567861
0356894526
:
0856325889
Document Version 2016-03