Smdr (Station Message Detail Recording) - Panasonic KX-NS1000 Feature Manual

•
If a failover SIP server is not registered, a REGISTER/INVITE request is immediately sent to the destination
obtained from a DNS resolution of the registrar server name.
Conditions
•
The failover destination is decided based on the following order.
1.
The failover destination IP address of the SIP server/Registrar server
2.
DNS SRV record / A record round robin
•
If the above failover operation fails, communication is attempted over a public CO line rather than a SIP
CO line.
Automatic Rerouting of SIP CO line Calls to Public CO line
When a SIP CO line call cannot be completed successfully, the PBX can automatically attempt to make the
call using a public CO line instead. This provides a backup method of making calls in cases when IP network
transmission cannot be completed successfully. For more information, refer to "15.1.23 Private Network
Features—VoIP (Voice over Internet Protocol)—Automatic Rerouting of VoIP Calls to Public CO Lines".
[Example]
Telephone Company
(area code: 098)
Extn .1000
Dials
"012-345-1011".
Installation Manual References
4.4 Virtual Cards
8.3 SIP CO Lines
PC Programming Manual References
9.11 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property—Main—
Address for Failover
9.11 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property—Register—
IP Address for Failover
9.11 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property—Option—
Timer(REGISTER)

18.1.6 SMDR (Station Message Detail Recording)

Description
Automatically logs detailed information for each extension.
1.
SMDR Output Port
Document Version 2016-03
012-345-1011
PBX-1
V-SIPGW
IP Network
18.1.6 SMDR (Station Message Detail Recording)
Telephone Company
(area code: 012)
PBX-2
V-SIPGW
Extn .1011
(012-345-1011)
SIP Server IP
Registrar Server
Failover
Feature Manual 349