Panasonic KX-NS1000 Feature Manual page 204

10.1.12 Intercept Routing
Programming Example
<Forward Destination of Virtual PS>
Ext. No. of the Virtual PS
<Intercept Destination of Virtual PS>
Ext. No. of the Virtual PS
When extension 2001 is called from another extension or is the first destination
of an incoming CO line call, etc., the call will ring at extension 600 (external pager)
first, and then ring at the intercept destination (extension 1001) after the IRNA
Timer expires.
[Available Intercept Destination]
The following can be used as intercept destinations:
Wired Extension (PT/SLT/SIP Extension/T1-OPX)
PS
ICD Group
PS Ring Group
UM Group
VM Group (DTMF/DPT)
Fax Unit
External Pager (TAFAS)
DISA
Idle Line Access no. + Phone no.
Trunk Group Access no. + Trunk Group no. + Phone no.
Extension of Another PBX (via TIE Line, Access with PBX Code)
Extension of Another PBX (via TIE Line, Access without PBX Code)
Intercept for calls to an outside destination
When an intercom, CO line, or DISA call is received by an extension and forwarded to an outside destination
by FWD—All Calls or FWD—Busy, the Intercept Routing feature can be used, if the outside destination is busy
or does not answer. For example, when a call is forwarded to a cellular phone by FWD—All Calls, and the
cellular phone is busy, the call will be routed to Voice Mail in the PBX.
204 Feature Manual
FWD Destination
2001 600
... ...
Intercept Destination
Day Lunch Break
2001 1001 1001
... ... ...
Intercept Destination
"600" is an example of a
Floating Extension No.
for the External Pager
...
Night
...
1001 1001
...
... ...
Availability
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
Document Version 2016-03