Cli (Calling Line Identification) Distribution - Panasonic KX-NS1000 Feature Manual

Feature
DISA Call Transfer to outside
user
Conditions
•
KX-NSE101, KX-NSE105, KX-NSE110, or KX-NSE120 (Activation Key for Mobile Extension) is required
to use these features. One activation key is required for each extension that will use these features.
Also, the Mobile Extension setting for each extension must be set to Enable.
•
Call disconnection detection
When LCOT is used for the CO line, the system cannot detect call disconnection. Therefore, the system
disconnects the CO line side after transferring the call (unscreened transfer).
PC Programming Manual References
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Option 9—
Extension
12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings—Option 9—
Extension
Feature Manual References
21.1.2 Virtual PS

4.1.14 CLI (Calling Line Identification) Distribution

Description
Directs an incoming CO line call to a specific destination when the caller's telephone number matches a number
in the System Speed Dialing Table. Each telephone number in this table can be assigned its own Calling Line
Identification (CLI) destination.
CLI distribution allows you to direct calls from specific people to specific destinations, and has many
applications. For example, you can program the PBX to automatically connect calls from priority clients to their
sales representatives, or automatically connect mobile phone calls from an executive to his or her assistant.
In order for CLI distribution to function, the PBX must receive Caller ID information from the telephone company.
CLI distribution works in conjunction with both Direct In Line (DIL) and Direct Inward Dialing (DID) distribution;
it can be enabled or disabled for each CO line (for DIL) and for each DID number, for each time mode.
When a call has Caller ID information and CLI distribution is enabled for the current time mode, CLI distribution
will direct the call to its destination, ignoring preprogrammed DIL or DID destinations.
Document Version 2016-03
4.1.14 CLI (Calling Line Identification) Distribution
Description & Reference
From the transfer destination (including the outside party), it is
possible to establish a Conference call, perform Call Splitting, and
page with a call on hold to transfer the call.
® 5.1.10 DISA (Direct Inward System Access)
Mobile
Mobile
Feature Manual 73