Private Network Features-Qsig-Enhanced Features - Panasonic KX-NS1000 Feature Manual

15.1.22 Private Network Features—QSIG—Enhanced Features
Conditions
•
This feature can be enabled or disabled on an ISDN (QSIG) port basis.
•
Call Transfer with Announcement and Call Transfer without Announcement is possible (® 4.1.10 Call
Transfer).
PC Programming Manual References
9.27 PBX Configuration—[1-1] Configuration—Slot—Port Property - PRI Port—Supplementary Service—
COLP, CLIR, COLR, CNIP, CONP, CNIR, CONR, CF (Rerouting), CT, CCBS, E911
9.31 PBX Configuration—[1-3] Configuration—Option—
PRI23 Card
Operating Manual References
1.3.11 Call Transfer
15.1.22 Private Network Features—QSIG—Enhanced Features
Description
When PBXs are networked using ISDN or V-IPGW cards, the following enhanced features are available.
When Calling an Extension in Another PBX and the Called Extension is Ringing
Feature
Leave Message Waiting
Absent Message Display
Ringing extension name display
before answer
When the Called Extension of Another PBX is Busy
Feature
Call Waiting
Executive Busy Override
Call Monitor
Leave Message Waiting
•
When a called extension on another PBX is busy, Automatic Callback Busy can be used as a Standard
QSIG feature (® 15.1.18 Private Network Features—QSIG—CCBS (Completion of Calls to Busy
Subscriber)).
•
The caller will be informed an extension is busy with a busy tone and a display indication.
•
Soft button operation is available for Call Waiting, Automatic Callback Busy and Executive Busy Override.
314 Feature Manual
New Card Installation—ISDN Standard Mode for
Description and Reference
® 13.1.3 Message Waiting
® 2.1.1 Absent Message
The ringing extension's name is displayed to the caller before the
call is answered.
Description and Reference
® 4.1.11 CALL WAITING FEATURES
Note
When this feature is used over a network, a call waiting tone
will be sent, even if OHCA or Whisper OHCA is enabled.
® 6.1.7 Executive Busy Override
® 4.1.6 Call Monitor
® 13.1.3 Message Waiting
Document Version 2016-03