Wireless Xdp Parallel Mode - Panasonic KX-NS1000 Feature Manual

22.1.6 Wireless XDP Parallel Mode

10.6.3 PBX Configuration—[2-6-3] System—Numbering Plan—B/NA DND Call Feature
→ BSS / OHCA / Whisper OHCA / DND Override
→ BSS / OHCA / Whisper OHCA / DND Override-2
10.7.1 PBX Configuration—[2-7-1] System—Class of Service—COS Settings—Assistant—
OHCA
Feature Manual References
4.1.22 COS (Class of Service)
Operating Manual References
1.3.77 Whisper OHCA
22.1.6 Wireless XDP Parallel Mode
Description
A portable station (PS) can be used in parallel with a wired telephone, i.e., a proprietary telephone (PT) or
single line telephone (SLT), allowing an extension user to make or receive calls with either the wired telephone
or the PS. The PS will use the same extension number as the wired telephone, and many of the wired
telephone's extension settings (Call Forwarding [FWD], Class of Service [COS], etc.) are also used by the PS.
In order to use a PS in Wireless XDP Parallel mode, the mode must be turned on using the PS.
[Example of Wireless XDP Parallel Mode, XDP Parallel Mode]
PBX
Extension Card
Wired Telephone
(PT, SLT)
Wireless XDP
Parallel Mode
Extn. 103
Conditions
•
Whether or not a PS is allowed to pair itself with a wired telephone is determined by the COS assigned to
the extension number of the wired telephone.
•
Wireless XDP Parallel mode can be turned on or off using the PS only.
•
To switch between the wired telephone and the PS during a conversation, simply go off-hook with the other
telephone. Alternatively, to seize a separate line, use another method, such as pressing a CO or
INTERCOM button.
In addition, going off-hook with the other telephone seizes a separate line when the extension is:
456 Feature Manual
CSIF Card
PS
Cell Station
OHCA / Whisper
Document Version 2016-03