NEC Univerge SV8100 System Hardware Manual page 137

3.1.4
RUN
LED2
(LED1)
Blinking
Off
Off
Blinking Blinking
Off
Off
On Blinking
Blinking
Blinking
4-20
CHUYÊN CUNG CẤP TỔNG ĐÀI NEC
LED Indications
The LEDs on the CD-CP00 indicate the following:
♦ RUN (LED 1) = The CPU is operating (green)
♦ LED 2, and 3 = Alarms (red)
♦ LED 4 = Flash access indication (red)
♦ LED 5 = The USB memory connection status (red)
(LED off when no USB memory installed)
♦ Refer to Program 90-10: System Alarm Setup for details on assigning
alarm LEDs.
Table 4-7A CD-CP00 LED Indications (booting)
LED and associated operation and status indications while system is
booting. Refer to
location of the LEDs on the CD-CP00.
Indications (operations) on page 4 – 21
associated operation and status indications while system is operation.
Table 4-7A CD-CP00 LED Indications (booting)
LED Indication
LED3
Off Off
Off Off
On Off
Off Access
On On Access
On Off Access
Blinking Blinking
Off Off
Off Off
Figure 4-3 CD-CP00 Blade Layout on page 4-14
LED4 LED5
Off On Steady When
USB Memory is
Installing
Off Blinking
Off Off
On Steady When
Blink USB Memory is
Installing
On Steady When
Blink USB Memory is
Installing
On Steady When
Blink USB Memory is
Installing
On Steady When
USB Memory is
Installing
Off Off
Off On Steady When
USB Memory is
Installing
http//vietpro.com.vn
UNIVERGE SV8100
provides a list of each
Table 4-7B CD-CP00 LED
provides a list of each LED and
Status
System operating normally
Boot is starting
Initializing the disk or
formatting
Boot program is initializing
in the flash memory
Reading system software
Upgrading system
software
Finish formatting (SRAM,
Flash)
DRAM error
FPGA version error
Installing the SV8100 Blades
for the