NEC Univerge SV8100 System Hardware Manual page 329

The IP1WW-2PGDAD connects to any available digital extension port. The terminal
connections made in the IP1WW-2PGDAD and the jumper settings determine what
features are used for each circuit.
2.2 LED Indications
LED
LED1
LED2
2.3 Setting up IP1WW-2PGDAD Connection
 If the IP1WW-2PGDAD is to be wall mounted, all the cable connections should
be made first.
 For the module to ID correctly after setting the jumpers, set the circuit type to 0
for the module port in Program 10-03-01 prior to connecting the line cord to the
IP1WW-2PGDAD.
6-2
CHUYÊN CUNG CẤP TỔNG ĐÀI NEC
Table 6-1 IP1WW-2PGDAD LED Indications
Indication
Green LED when
CH1 in use.
Green LED when
CH2 in use.
Figure 6-1 IP1WW-2PGDAD
Flashing green LED indicates DIP Switch setting and
programming for CH1 are conflicting.
Flashing green LED indicates DIP Switch setting and
programming for CH2 are conflicting.
s
Installing SV8100 Optional Equipment
http//vietpro.com.vn
UNIVERGE SV8100
Note