NEC Univerge SV8100 System Hardware Manual page 263

4.8
5-38
CHUYÊN CUNG CẤP TỔNG ĐÀI NEC
Removal and Replacement of the BS( )-L Kit (Ten Key Kit)
The Business BS( )-L Kit (in black or white), is commonly delivered with
the UNIVERGE SV8100 multiline terminal. If required, the BS( )-L Kit can
be removed and replaced on the DT300/DT700 Series multiline terminal.
4.8.1 Remove the BS( )-L Kit
1. Pry the right side panel from the multiline terminal (refer to
5-37 Remove Plastic
Figure 5-37 Remove Plastic Panels
2. Remove the Numbered Keypad panel. (Refer to paragraph
Figure 5-38 Remove the Ten Key Kit on page
Installing DT300/DT700 Series (DTL/ITL) Digital and IP Multiline Terminals
Panels).
http//vietpro.com.vn
UNIVERGE SV8100
Figure
5-39.)