NEC Univerge SV8100 System Hardware Manual page 319

SECTION 7 BLUETOOTH HUB ADAPTER
7.1
5-94
CHUYÊN CUNG CẤP TỔNG ĐÀI NEC
Bluetooth Hub Adapter (BHA) Features
The BHA-L UNIT adapter connects a Bluetooth device to a multiline terminal.
The BHA-L UNIT cannot be connected to the DTL-2E-1( ) or DTL-6DE-1( )
telephone.
7.1.1 Installing the BHA-L UNIT
Before installing or removing the BHA-L UNIT, remove
the line cord and the AC adapter from the outlet.
1. Turn multiline terminal upside down.
2. Unplug the line cord and handset cord from the multiline terminal.
Only one BHA-L UNIT can be attached to the DTL multiline
terminal.
3. Lower the tilt leg to the first position (refer to
Separate Tilt Leg from Leg
4. Remove the connector cover (rubber) from the bottom of the
multiline terminal (see
Cover on page
Installing DT300/DT700 Series (DTL/ITL) Digital and IP Multiline Terminals
Support).
Figure 5-120 Separate Tilt Leg from Leg Support
Figure 5-121 Removing the Connector
5-95).
http//vietpro.com.vn
UNIVERGE SV8100
Figure 5-120