NEC Univerge SV8100 System Hardware Manual page 259

4.6 Installing the Directory Card on the Multiline Terminal
Figure 5-30 Attaching Directory Card to Directory Card Holder
5-34
CHUYÊN CUNG CẤP TỔNG ĐÀI NEC
A directory card can be attached to DT300/DT700 Series multiline terminals.
The directory card can be used to record often dialed numbers or other
important information.
1. After recording the information on the lined insert, reinsert it between the
plastic panels of the directory card. Attach the directory card to the
directory card holder as illustrated in
to Directory Card
card holder.
2. Locate the two grooves on the top of the telephone as illustrated in
5-31 Attaching Directory Card Holder to the multiline
directory card holder into the grooves on the multiline terminal until they
snap into place.
To remove the directory card, press the two sides of the directory card
holder inward until the tabs release and pull the holder out of the
grooves.
Installing DT300/DT700 Series (DTL/ITL) Digital and IP Multiline Terminals
Figure 5-30 Attaching Directory Card
Holder. Note that the open end slides into the directory
http//vietpro.com.vn
UNIVERGE SV8100
Figure
terminal. Push the