NEC Univerge SV8100 System Hardware Manual page 281

5-56
CHUYÊN CUNG CẤP TỔNG ĐÀI NEC
3. Remove the screw (refer to
Panel from multiline terminal on page
4. Carefully, return the multiline terminal to the buttons side
up position.
5. Remove the soft keys and line key kit from the
telephone.
6. Gently lift the small black bar on the ribbon cable
connector
Connector).
7. Plug ribbon cable on back of 8LKD (LD)-L UNIT into
connector until pressure is felt.
8. Press down on the black bar to lock the cable into place
(refer to
5-56).
Installing DT300/DT700 Series (DTL/ITL) Digital and IP Multiline Terminals
(refer to Figure
Figure 5-62 Ribbon Cable Connector
Figure 5-62 Ribbon Cable Installed on page
http//vietpro.com.vn
UNIVERGE SV8100
Figure 5-61 Remove Side
5-55).
5-62 Ribbon Cable