NEC Univerge SV8100 System Hardware Manual page 363

10.3.2
6-36
CHUYÊN CUNG CẤP TỔNG ĐÀI NEC
Installing the ADA-L UNIT
Perform the following steps to connect the ADA-L UNIT to the Bottom
Option Interface located underneath the DTL/ITL multiline terminal.
Only one ADA-L UNIT can be installed at a time.
To prevent possible damage to the ADA-L UNIT or the
DTL/ITL multiline terminal during installation or removal,
disconnect the line cord/LAN cable and the AC/DC
adapter from the DTL/ITL multiline terminal.
1. Unplug the line cord from the keyset.
2. Turn the DTL/ITL multiline terminal upside down.
3. Lower the tilt leg to the first position (refer to
Leg from Leg Support).
Figure 6-24 Separate Tilt Leg from Leg Support
Figure 6-24 Separate Tilt
Installing SV8100 Optional Equipment
http//vietpro.com.vn
UNIVERGE SV8100