NEC Univerge SV8100 System Hardware Manual page 272

UNIVERGE SV8100
4.11
System Hardware Manual
CHUYÊN CUNG CẤP TỔNG ĐÀI NEC
Wall Mounting the Multiline Terminal
You can wall mount a DT300/DT700 Series connection multiline terminal
using the base cover or an optional wall mount unit. A wall mount unit must
be used if adapters are installed on the multiline terminal.
When optional adapters are used, the multiline terminal must be installed
on the wall using the WM-L UNIT (refer to
4.11.1 Wall Mounting a multiline terminal using the Base Plate
4.11.1.1 Adjusting the Hanger Hook
1. Remove the hook from the unit.
Figure 5-48 Removing the Hanger Hook on a
2. Turn the hook with the tab toward the top.
3. Slide the hook until it glides into position forming the
hanger hook for the handset.
Figure 5-49 Sliding the Hanger Hook into Position
5.2.7 WM-L UNIT on page 7-7
DT300/DT700 Series Terminal
http//vietpro.com.vn
5-47