NEC Univerge SV8100 System Hardware Manual page 217

6.4 CD-ETIA (Gigabit PoE Switch)
RJ45 Connector
(x8)
Activity LED
(x8)
6.4.1
4-100
CHUYÊN CUNG CẤP TỔNG ĐÀI NEC
Figure 4-40 CD-ETIA Blade
Description
The CD-ETIA blade is a managed 8-port gigabit ethernet PoE switch.
Ports 1 and 8 are the default uplink ports. All the user management and
stacking are based on this setup. This blade provides:
♦ 8 Gigabit Ethernet (10 Base-T/100 Base-TX/1000 Base-T) Ports
♦ Per Port Status LED Indicating Link, Speed and Activity
♦ 802.3af PoE on All Ports Providing up to 15.4W of Power
- Selectable level per port via web-based management interface
♦ Auto-MDI/MDI-X Auto Crossover (when auto-negotiation is available)
♦ Layer 2 Switching
♦ QoS
♦ 802.1Q VLANs
♦ 802.1p Priority Queuing
♦ Port Mirroring
♦ 802.3x Flow Control
♦ Independent VLAN Learning Support
♦ TCP/IP Networking Stack
♦ Multi-Unit Stacking (multiple blades in a system are managed from the
same user interface)
♦ Dynamic PoE Control (allows setting the proper PoE classifications for
each port to stay within the system power budget)
♦ Switch Management Through Web-Based GUI
♦ Software Upgrades Via TFTP
http//vietpro.com.vn
UNIVERGE SV8100
Installing the SV8100 Blades