NEC Univerge SV8100 System Hardware Manual page 366

UNIVERGE SV8100
10.4
The APR-L UNIT (Analog Port Ringer) provides an analog interface for the terminal.
The APR-L UNIT adapter provides ringing which allows the connected device to be
used for incoming and outgoing calls. This adapter also provides a separate
extension number for the analog device, which allows both devices to be used at
the same time (this can be removed in system programming if you wish). One
terminal can have an APR-L UNIT adapter.
The maximum distance between the APR-L UNIT and the analog terminal is 49
feet.
With the APR-L UNIT adapter installed, and the analog device attached to the
adapter is in use, the telephone cannot be used -Only one physical port number
assigned to the telephone. If both the analog device and telephone are picked up at
the same time, the analog device takes priority. If the terminal user is on a call and
the single line telephone is picked up, the single line telephone takes the call from
the terminal user.
When installing or removing the adapters, the telephone should be unplugged
from the system.
The APR-L UNIT does not support reverse-polarity, message waiting lamping, or
Caller ID.
System Hardware Manual
CHUYÊN CUNG CẤP TỔNG ĐÀI NEC
10.3.3.2 ADA-L UNIT Connection for Sending Recorded Calls to
the Telephone
1. Set the ADA-L UNIT DSW switches (see
2. Using the mini-plug connection cord, connect the ADA-L
APR-L UNIT
ADA-L UNIT on page

Set DSW 6 to ON.

When sending recorded calls to the
telephone, set DSW switch 1 to ON.
Unit IN jack to the cassette recorder EAR PHONE jack
(Refer to Figure 6-28 ADA-L IN Jack
Figure 6-28 ADA-L IN Jack Connection
http//vietpro.com.vn
Figure 6-23
6-34).
Connection).
6-39