NEC Univerge SV8100 System Hardware Manual page 78

UNIVERGE SV8100
2.4 Rack Mounting the 19" Chassis
A single or multiple chassis can be rack mounted. Controlling and Expansion
chassis can be racked mounted by stacking them horizontally..
1. The 19" chassis requires two rack mount brackets per chassis for mounting.
2. Line up the Rack Mount Bracket(s) with the pre-drilled holes on each side of
3. Secure the brackets to the chassis using the supplied screws. Refer to
System Hardware Manual
CHUYÊN CUNG CẤP TỔNG ĐÀI NEC
Each 19" chassis requires its own set of rack mount bracket(s). Refer to
Figure 3-22 CHS2U Rack Mount
Stacking additional chassis (without rack mount brackets)
on top of one rack mounted chassis is not recommended.
Figure 3-22 CHS2U Rack Mount Bracket
the 19" chassis.
3-23 Rack Mount Bracket Installed 19" CHS2U on page 3-20
chassis.
Brackets.
http//vietpro.com.vn
Figure
for the 19"
3-19