I Nstallation - NEC Univerge SV8100 System Hardware Manual

4.4.2
4-50
CHUYÊN CUNG CẤP TỔNG ĐÀI NEC
Installation
♦
When connecting a fax machine or analog modem,
make sure to set Program 15-03-03 to 1 (special
terminal) to avoid communication problems.
♦
The CD-4LCA/CD-8LCA Blade and PZ-4LCA/PZ-8LCE
Daughter Board are categorized as TNV2. With this
designation, off-premise wiring is not acceptable. Any
cabling to these blades or daughter boards must be
within the building – no outside cabling is permitted.
♦
Branch connection is not acceptable.
This daughter board can be installed on the CD-4LCA or CD-8LCA
blades.
To install the PZ-4LCA/PZ-8LCE:
1. Included with the PZ-4LCA/PZ-8LCE are four plastic spacers. Install the
plastic spacers onto either the CD-4LCA or CD-8LCA. Make sure to
attach the spacers so that they extend out on the side of the daughter
board which has the CN1 connector. Refer to
PZ-4LCA Daughter Board on page 4-46
PZ-8LCE Daughter Board on page
2. Position the PZ-4LCA/PZ-8LCE CN1 connector over the CN4
connector on the CD-4LCA/CD-8LCA blade. Press the boards together,
ensuring the plastic spacers lock in place. Refer to
the PZ-4LC A Daughter Board on page 4-46
Daughter Board on page
the PZ-8LCE
3. Install the CD-4LCA/CD-8LCA blade with daughter board in the slot on
the chassis.
http//vietpro.com.vn
UNIVERGE SV8100
Figure 4-17 Installing the
and Figure 4-18 Installing the
4-47.
Figure 4-17 Installing
and Figure 4-18 Installing
4-47.
Installing the SV8100 Blades