Accessing The Plc By The Px Developer, Gx Configurator - Mitsubishi Electric GOT2000 Series Connection Manual

22.7.3

Accessing the PLC by the PX Developer, GX Configurator

The setting method for the FA transparent function of PX Developer is used as an example.
■1. Connecting the GOT and PLC in bus connection or direct CPU connection (when
connecting to QCPU (Q mode))
Step 1.
Click [Online]
Step 2.
The [Transfer Setup] is displayed.
Step 3.
Set the [Transfer Setup]:
PC side I/F: Serial USB (COM)
PLC side I/F: PLC module
Other station: No specification
Step 4.
Double-click [Serial] of the PC side I/F to display [PC side I/F Serial setting].
Step 5.
Select [USB] in the [PC side I/F Serial Setting] dialog.
(For bus connection)
Step 6.
Double-click [PLC module] of the PLC side I/F to display [PLC side I/F Detailed setting of PLC module].
[Transfer Setup] in PX Developer.
22.7 Personal Computer Side Setting
22
22 - 85