Device Range That Can Be Set - Mitsubishi Electric GOT2000 Series Connection Manual

14.4 Device Range that Can Be Set

The device ranges of controller that can be used for GOT are as follows.
Note that the device ranges in the following tables are the maximum values that can be set in GT Designer3.
The device specifications of controllers may differ depending on the models, even though belonging to the same series.
Please make the setting according to the specifications of the controller actually used.
When a non-existent device or a device number outside the range is set, other objects with correct device settings may not
be monitored.
■1. Setting item
(Serial connection)
Item
Device
[Switch to the device
define dialog]
Information
*1
14 - 54
14.4 Device Range that Can Be Set
Set the device name, device number, and bit number.
The bit number can be set only by specifying the bit of word device.
Monitors the inverter of the specified station No.
0 to 31: To monitor the inverter of the specified station No.
Station No.
100 to 115: To specify the station No. of the inverter to be monitored by the value of GOT data register
*1
(GD).
Refer to (2)
Displays the device type and setting range which are selected in [Device].
The following shows the relation between the inverter station numbers and the GOT data register.
Station No.
100
101
:
114
115
Description
GOT data register (GD)
GD10
GD11
:
GD24
GD25
Setting range
0 to 31
(If setting a value outside the range
above, a device range error occurs)