Mitsubishi Electric GOT2000 Series Connection Manual page 414

PLC
RS-422 connector
Model name
conversion cable
-
MR-MQ100
-
-
*1 For details of the GOT multi-drop connection, refer to the following.
➠
*2 For the connection to GOT, refer to the connection diagram.
➠
*3 For the connection to GOT, refer to the connection diagram.
➠
*4 When a GT10-C02H-6PT9P unit of the sub version A or B is used, do not ground the case of the D-sub (9-pin) connector.
*5 For the connection to GOT, refer to the connection diagram.
➠
*6 For the connection to GOT, refer to the connection diagram.
➠
*7 GT25-W, GT2505-V does not support the option device.
6 - 40
6.2 System Configuration
Communication
type
Q170MIOCBL1M-B(1m)
RS-422
Q170MIOCBL1M-B(1m)
Q170MIOCBL1M-A(1m)
19. GOT MULTI-DROP CONNECTION
RS-422 connection diagram 2)
RS-422 connection diagram 5)
RS-232 connection diagram 3)
RS-422 connection diagram 11)
POINT POINT POINT
When connecting to the motion controller CPU (Q Series) other than Q170MCPU or
Q170MSCPU(-S1)
A motion controller CPU (Q Series) mounted to the multiple CPU system of the QCPU (Q mode)
can be monitored.
The system configuration, connection conditions, and system equipment for connecting a GOT to
a motion controller CPU (Q Series) are the same as those for connecting to the QCPU.
➠
6.2.1 Connecting to QCPU
Connection cable
Max.
Cable model
distance
+
30m
RS-422 connection
diagram 9)
+
30m
RS-422 connection
diagram 10)
*6
1m
GOT
*7
Model
Option device
- (Built into GOT)
GT15-RS4-9S
GT10-C02H-9SC
*1
-
GT01-RS4-M
- (Built into GOT)
- (Built into GOT)
Number of
connectable
equipment
1 GOT for 1 PLC