Mitsubishi Electric GOT2000 Series Connection Manual page 259

Step 2.
Set the trigger action.
Set the trigger action so that the station number is switched when the faulty station information (SW70) of
MELSECNET/H turns ON in the project specified by choosing [Common]
Condition 1 : SW70.b0 (while ON)
Operation : GD100=2
Condition 1 : SW70.b1 (while ON)
Operation : GD100=1
Make the setting so that the station number is switched when the faulty station information (GS231) from
the station monitoring specified by selecting [Common]
Condition 1 : GS231.b0 (while ON)
Operation : GD100=2
Condition 1 : GS231.b1 (while ON)
Operation : GD100=1
When b0 is ON, Station No. 1 is abnormal.
Screen No. is changed to 2.
When b1 is ON, Station No. 2 is abnormal.
Screen No. is changed to 1.
[trigger action] turns ON.
When b0 is ON, Station No. 1 is abnormal.
Screen No. is changed to 2.
When b1 is ON, Station No. 2 is abnormal.
Screen No. is changed to 1.
4.2 MELSEC Q Series
[trigger action].
4 - 83
4