1.1.1
Setting connected equipment (Channel setting)
Set the channel of the equipment connected to the GOT.
■1. Setting
Step 1.
Select [Common]
Step 2.
The Controller Setting dialog box appears. Select the channel No. to be used from the list menu.
Step 3.
Refer to the following explanations for the setting.
1 - 4
1.1 Setting the Communication Interface
[Controller Setting] from the menu.
POINT
POINT
POINT
Channel No.2 to No.4
Use the channel No.2 to No.4 when using the Multi-channel function.
For details of the Multi-channel function, refer to the following.
➠
Mitsubishi Electric Products 19. MULTI-CHANNEL FUNCTION