When Connecting The Got And Servo Amplifiers Through A Motion Controller Or Simple Motion Module - Mitsubishi Electric GOT2000 Series Connection Manual

15.4.2 When connecting the GOT and servo amplifiers through a motion
controller or simple motion module
The GOT side settings differ depending on the connection type between the GOT and a motion controller or PLC. For
details of the GOT side settings, refer to the following.
➠
5. ETHERNET CONNECTION
➠
6. DIRECT CONNECTION TO CPU
➠
7. SERIAL COMMUNICATION CONNECTION
➠ 8. BUS CONNECTION
➠
9. MELSECNET/H CONNECTION (PLC TO PLC NETWORK), MELSECNET/10 CONNECTION
(PLC TO PLC NETWORK)
➠
10. CC-Link IE CONTROLLER NETWORK CONNECTION
➠ 11. CC-Link IE FIELD NETWORK CONNECTION
➠
12. CC-Link CONNECTION (INTELLIGENT DEVICE STATION)
➠
13. CC-Link CONNECTION (Via G4)
15.4 GOT Side Settings
15
15 - 21