Plc Side Setting - Mitsubishi Electric GOT2000 Series Connection Manual

10.4 PLC Side Setting

This section describes the settings of the GOT and CC-Link IE controller network module in the following case of system
configuration.
10.4.1 Connecting to MELSEC iQ-R series
■1. System configuration1 (Network Type: CC IE Control)
*1 The CC-Link IE Controller Network module is mounted on slot 0 of the base unit.
The start I/O No. of the CC-Link IE Controller Network module is set at [0].
■2. System configuration1 (Network Type: CC IE Control extended mode)
*1 The CC-Link IE Controller Network module is mounted on slot 0 of the base unit.
The start I/O No. of the CC-Link IE Controller Network module is set at [0].
POINT POINT POINT
CC-Link IE Controller Network module
For details of the CC-Link IE Controller Network module, refer to the following manual.
➠ CC-Link IE Controller Network Reference Manual
CC-Link IE Controller Network module
<CC-Link IE Controller Network module>
(Use the default value for settings other than the following.)
Station No.
Mode Setting
Network type
Network No.
Total stations
Network range assignment :LB0000
CC-Link IE Controller Network
<CC-Link IE Controller Network module>
(Use the default value for settings other than the following.)
Station No.
Mode Setting
Network type
Network No.
Total stations
Network range assignment :LB0000
<GOT>
(Use the default value for settings other than
the following.)
*1
:1
:Online
:CC IE Control (Control station)
:1
:2
to LB00FF
H H
LW00000 to LW000FF
H H
<GOT>
(Use the default value for settings other than
the following.)
*1
:1
:Online
:CC IE Control extended mode
(Control station)
:1
:2
to LB00FF
H H
LW00000 to LW000FF
H H
10.4 PLC Side Setting
10
10 - 15