Mitsubishi Electric GOT2000 Series Connection Manual page 610

(b) Network range assignment
Total stations
LB/LW settings (1)
LX/LY settings
Monitoring time
Specify I/O master station
Specify reserved station
Supplementary settings
*1
10 - 32
10.4 PLC Side Setting
Item
Station No.1
LB
Station No.2
Station No.1
LW
Station No.2
*1
*1
Be sure to set it to perform the cyclic transmission.
POINT POINT POINT
When changing the network parameter
After writing the network parameter to the C Controller module (Q Series), either turn the C
Controller module (Q Series) OFF and then ON or reset it.
Set value
Start 0000H
End 00FFH
Start 0100H
End 01FFH
Start 00000H
End 000FFH
Start 00100H
End 001FFH
No setting
(Use default value)
No setting
No setting
(Use default value)
: Necessary
Setting necessity at GOT
2
: As necessary
connection
: Not necessary