Got Side Settings - Mitsubishi Electric GOT2000 Series Connection Manual

6.4

GOT Side Settings

6.4.1 Setting communication interface (Controller Setting)
Set the channel of the connected equipment.
Step 1.
Select [Common]
Step 2.
The Controller Setting window is displayed. Select the channel to be used from the list menu.
Step 3.
Set the following items.
• Manufacturer: MITSUBISHI ELECTRIC
• Controller Type: Set according to the Controller Type to be connected.
• I/F: Interface to be used
• Driver: Set either of the following according to the Controller Type to be connected.
<For GT27, GT25, GT23>
Serial (MELSEC)
MELSEC-FX
MELSEC-WS
<For GT21>
Serial (MELSEC)
MELSEC-A
MELSEC-FX
<For GS>
Serial (MELSEC)
MELSEC-A
MELSEC-FX
Step 4.
The detailed setting is displayed after Manufacturer, Controller Type, I/F, and Driver are set.
Make the settings according to the usage environment.
➠
6.4.2Communication detail settings
Click the [OK] button when settings are completed.
POINT POINT POINT
GOT Multi- Drop Connection
When using the serial multi-drop connection unit, refer to the following.
➠ 19. GOT MULTI-DROP CONNECTION
2.
[Controller Setting] from the menu.
3.
4.
Click!
6.4 GOT Side Settings
6
6 - 47