■5. Confirming the communication state of Ethernet module
(1) When using the Command Prompt of Windows.
Execute a Ping command at the Command Prompt of Windows.
(a)
When normal communication
C:\>Ping 192.168.3.19
Reply from 192.168.3.19: bytes=32 time<1ms TTL=64
(b)
When abnormal communication
C:\>Ping 192.168.3.19
Request timed out.
(2) When abnormal communication
At abnormal communication, check the followings and execute the Ping command again.
• Mounting condition of Ethernet communication unit
• Cable connecting condition
• Confirmation of switch and network parameter setting
• Operation state of PLC CPU (faulty or not)
• IP address of GOT specified by Ping command
5 - 88
5.4 PLC Side Setting
POINT
POINT
POINT
Ethernet diagnostics of FX3U-ENET-L Configuration tool
Ethernet diagnostics of FX3U-ENET-L Configuration tool is available to a Ping test from the PLC.
For details of Ethernet diagnostics of FX3U-ENET-L Configuration tool, refer to the following
manual.
➠
FX3U-ENET-L Configuration tool Operation manual