Connection To Ethernet Module - Mitsubishi Electric GOT2000 Series Connection Manual

4.1.2

Connection to Ethernet module

■1. One-to-one connection of GOT and redundant system
(1) System configuration example
The following connection configuration examples are explained.
Control system
(system A)
N/W No.: 1
PC No.: 1
IP address: 192.168.3.1
Port No.: 5001
(2) Connection method
Connect the built-in Ethernet port CPU to the GOT.
➠ 5. ETHERNET CONNECTION
(3) PLC Side Setting (GX Works3)
(a) Control system (system A) PLC setting
• Module parameter setting of Ethernet module
IP address setting
Subnet Mask
Default Gateway
Setting Method of Network No. and Station No.
Network No.
Station No.
Transient Transmission Group No.
Online Program Change Permission/Protection Setting
Communication Data Code
Open Method Setting
Target Device Connection Configuration Setting
GOT
Ethernet
4)
1) 2) 5)
1) Process CPU
2) Redundant function module
3) Tracking cable
4) Ethernet module
5) CC-Link IE Filed Network Master/Local module
Item
N/W No.: 1
PC No.: 3
IP address: 192.168.3.18
Port No.: 5001
4)
1) 2) 5)
3)
Set value
192.168.3.1
-
-
Do Not Use IP Address
1
1
(Use default value)
-
4.1 MELSEC iQ-R Series
(Redundant system: Pair No.1)
Standby system (system B)
N/W No.: 1
PC No.: 2
IP address: 192.168.3.2
Port No.: 5001
4
4 - 9