GE MiCOM P40 Agile Technical Manual page 612

P44x/EN VH/Hb6
(VC) 16-8
Software Hardware Model
version version number
Branch C2.x : Idem C1.x with UCA2 (Ethernet optical support) & new function (49+NCIT)
C2.0 30
C2.1 30
C2.2 30
C2.5 30
G - J
for P441/442
C2.6 30
G - J - H
for P444
C2.7 30
C2.8 30
C2.9 30
C2.10c 30
C2.11
to 30
C2.16
C2.17-S 30
Note 1: Software version / hardware version / model number can be found by setting in "system data" with MiCOM S1 or LCD front panel.
Note 2: Version C2.0 and C2.1, 2.10c – C2.11 not distributed
Note 3: Patch 20 & 30 are included with MiCOM S1 version V2.11
Relay type: P441, P442, P444
Date of
issue
New platform- NCIT/ Thermal Overload as P540/ Synchro TP bus/ Optos
tagging in event/ ZSP angle/ Dynamic management Bus-Line for checksync/
08/2004
DEF Reverse sensitivity/ Time sync input/ ZSP start/ Ethernet module NCIT
61850-9-2
09/2004 Timer 0/DNP3 correction
10/2004 InterMicom/ DEF primary scale/ AREVA name in UCA2
Phase select. PPground/ Reset IN dead/ DNP3 & CB Close/ Floc/ Opto& setting
11/2004
group selection/ DNP3
Primary measurement & Im - Error during flash with optical fiber/ Floc&Broken
05/2005
currents new cells in DNP3-E2.0 official platform with NCIT
UCA2 no longer supported (from that version onwards)/ Add phase voltage
inversion detection in Voltage Transformer Supervision (V2 presence without I0
07/2005
and I2)./
Add IEC61870-5-103 Generic Services
P0 time delay/ NCIT sampling/Extended mode with DRec/ OpticFiber with KBus
02/2006
model/ Tilt angle & K0/ Reset latch DDB& LEDs
DNP3/ PreTrigger in DRec/ Tilt angle & K0/ C264 compatibility in DNP3/ Reset
03/2006
VTS 3phases
05/2006 Add Chinese HMI (First implementation, will become standard in next version)
Zone reset&overlap/ WeakInfeed Echo+DEF/ Control Inp/ Z1ext+Tilt/ Selfcheck
052007 Output board/ DRec & 5Amp/ Start D & Phase Selection/ Timer&Thermal Protec
5Amp
2011 New Alstom Grid
Full Description of changes
(mandatory upgrade). Versions C2.2 to C2.8 and C2.12 to C2.15: Recommended upgrade.
Hardware / Software-Version
MiCOM P40 Agile P442, P444
S1 Compatibility
V2.10 + patch*
or
V2.11
V2.12 + patch
V2.14