Cable And Fuse Dimensions - Bosch Rexroth EFC 3600 Operating Instructions Manual

Bosch Rexroth AG
Mounting and Installation
5.9

Cable and Fuse Dimensions

5.9.1 Selection Standards
The power cable dimensions and the fuse dimensions are based on the VDE 0298
(part 4) and the standard for the European countries EN 60204-1.
The dimension for flexible wiring is according to VDE 0298 (part 4) and for fix wiring
according to VDE 0298 (part 4) or IEC 60364-5 (operating temperature at the conduc‐
tor 90 ℃).
The cable and fuse dimensions for USA / Canada are based on UL508A.
The manufacturer of the machine/installation is responsible for conformity
with regional provisions and other standards that are relevant for the re‐
spective application and the place of installation. Also factors, such as in‐
stallation methods, grounding, insulation and over-voltage protection must
be taken into consideration.
National standards, such as NFPA in the USA, regional provisions, ground, operating
temperature, operating cycles, over-voltage protection and system configuration can
have a decisive impact on the dimensioning of the cables and therefore they must be
given priority over the above factors.
If, as a consequence of this, further requirement and cable designs arise
that are not mentioned in this documentation, contact your Bosch Rexroth
sales partner.
34/235
DOK-RCON03-EFC-3600***-IT01-EN-P
Rexroth Frequency Converter EFC 3600