Panasonic EBL128 Operating Instructions Manual page 33

Panasonic Eco Solutions Nordic AB
MEW01623 Rev: -
The outside switch is turned OFF (i.e. from activated to not
activated state).
 The fault "
FAULT: FB Silence switch active"
28
Serviced
.
 Any alarm point / zone in fire alarm state will automatically be
disabled / isolated. (I.e. it has to be re-enabled via menu
H2/B5-B6.)
 Any alarm point / zone in fire alarm state will automatically
change state to "Isolated alarm" and in the fire alarm list
(presented in the LCD) will "
An example:
ISO ZONE-ADDR 12-46 LAST ZONE 12
This is a user defined alarm text.
 The c.i.e. built-in buzzer is re-enabled.
27
Always latched, regardless of if faults are programmed to be not latched.
28
Since this fault is always latched, it has to be acknowledged via menu H6.
31
EBL128 Operating Instructions V2.0.x
ALM ISO
" be changed to "
No. 01
will be
".