—nongraceshutdown — (Chassis only) Turns off the chassis ungracefully.
—reset — Performs a hard reset of the module.
When <module> = kvm or switch, <action> must be powercycle or reset.
None
Output
•
Perform a reset of switch-3:
Example
racadm chassisaction -m switch-3 reset
Module power operation successful.
•
Perform a non graceful shutdown of the chassis:
racadm chassisaction -m chassis nongraceshutdown
chassislog
Description
Displays chassis log and management operations.
Synopsis
racadm chassislog <chassislog command type>
Input
chassislog command types:
•
view — View chassis log
– To View chassis log
•
export — Export to local disk and network share
– Export chassis log to local disk
– Export chassis log to network share CIFS
– Export chassis log to network share NFS
•
clear — Clear chassis log
– To clear chassis log
closessn
Description
Closes a communication session on the device. Use getssninfo to view a list of sessions that can be closed
using this command.
NOTE: If a server takes longer duration to turn off gracefully after the chassis power cycle is
initiated, CMC stops functioning indicating that graceful shutdown of the server was
unsuccessful. In this case, you must ungracefully turn off the system or try to gracefully turn off
the system again.
racadm chassislog view
racadm -r 192.168.0.32 chassislog export -f filename.log
racadm -r 192.168.0.32 chassislog export -f //192.168.0.120/data/
filename.log
racadm -r 192.168.0.32 chassislog export -f 192.168.0.120/data/
filename.log
racadm chassislog clear
NOTE: To clear the chassis log, you must have the Clear Logs Administrator privilege.
NOTE: racadm chassislog export -f <filename> is supported only for remote
interface(s).
17