Getled; Getmacaddress - Dell PowerEdge M1000e Reference Manual

getled

Description Displays the LED settings on a module: blinking, not blinking, or unknown (for empty slots).
To run this subcommand, you must have the Login User privilege.
racadm getled -m <module>
Synopsis
—m <module> can be one of the following:
Input
• server-<n> where n=1–16
• server-<nx> where n=1–8; x=a, b, c, d (lower case)
• switch-<n> where n=1–6
• chassis
• cmc-active
Output • LED is blinking
• LED is not-blinking
•
Example racadm getled -m server-10
<module> <LED state>
server-10 Blinking
•
racadm getled -m chassis
<module> <LED state>
server-10 Not blinking
•
racadm getled -m server-1
<module> <LED state>
server-1 ON
•
racadm getled -m server-9
<module> <LED state>
server-9 Extension(1)

getmacaddress

Description Displays the MAC/WWN addresses and fabric ID decoder for all modules or for a specified module.
The decoder values indicate the protocols of the netowrk cards:
•
•
•
•
To use this subcommand, you must have the CMC Login User privilege.
Synopsis
•
•
•
•
•
•
38
0 — Unsupported
1 — ISCSI
2 — FCoE-FIP
3 — iSCSI/FCoE-FIP
racadm getmacaddress
racadm getmacaddress -m chassis
racadm getmacaddress -m switch-<n>
racadm getmacaddress [-m <module> [-x]] [-t iscsi]
racadm getmacaddress [-a]
racadm getmacaddress -c IO-Identity