Getioinfo - Dell PowerEdge M1000e Reference Manual

15 SLOT-15
16 SLOT-16
Switch Module Fan Request Table
<IO> <Name>
Switch-1 PowerEdge M I/O
Aggregator
Switch-2 PowerEdge M I/O
Aggregator
Switch-3 MXL 10/40GbE
Switch-4 N/A
Switch-5 N/A
Switch-6 N/A
[Enhanced Cooling Mode]
Enhanced Cooling Mode(ECM) Status

getioinfo

Description Displays general information about the I/O modules on the chassis.
To run this subcommand, you must have the CMC Login User privilege.
racadm getioinfo [-m <module>] [-s]
Synopsis
• -m <module> — Specifies the module or device.<module> must be switch — <n>, where n = 1–6
Input
• -s — Displays stack information.
Example
•
racadm getioinfo
<IO> <Name>
switch-1 Dell
Ethernet
Passthrough
switch-2 N/A
switch-3 Brocade
4424
switch-4 N/A
switch-5 N/A
36
PowerEdge M630
N/A
NOTE: The fabric type may be any supported I/O fabric type, such as Ethernet, Fibre Channel, and
InfiniBand.
<Type>
Gigabit
Ethernet
None
Fibre
Channel 4
None
None
ON
N/A
<Type>
10 GbE KR
10 GbE KR
10 GbE KR
None
None
None
= Disabled
<Presence> <POST>
Present OK
Not Present N/A
Present OK
Not Present N/A
Not Present N/A
Present
Present
<Presence> <Fan Request%>
Present 30
Present 30
Present 30
Not Present N/A
Not Present N/A
Not Present N/A
<Power>
ON
N/A
ON
N/A
N/A
38
N/A
<Role>
Master
N/A
Master
N/A
N/A