Using racadm config -g cfgRacTuning -o cfgRacTuneEnhancedLog 1 command,
Enhanced Logging feature is enabled.
SeqNumber
Message ID
Category
AgentID
Severity
Timestamp
Message Arg
Message Arg
Message
getractime
Description
Displays the current CMC time.
•
Synopsis
racadm getractime [-d]
•
racadm getractime [-d] [-z]
•
racadm getractime [-n]
•
-d — Displays the time in the format, YYYYMMDDhhmmss.
Input
•
-z — Displays timezone.
•
-n — Displays NTP peer information.
Output
The current CMC time is displayed.
•
Example
racadm getractime
Mon May 13 17:17:12 2013
•
racadm getractime -d
20141126114423
getredundancymode
Description
Displays the redundancy status (Redundant or Non-Redundant) of the CMC.
To run this subcommand, you must have the CMC Login User privilege.
racadm getredundancymode
Synopsis
Input
N/A
racadm getredundancymode
Example
Redundant
getsel
Displays all system event log (SEL) entries in CMC.
Description
•
Synopsis
racadm getsel [-i] [-m <module>]
•
racadm getsel [-s <start>][-c <count>] [-m <moduel>] [--more]
50
= 38
= USR8501
= Audit
= CMC
= Information
= 2014-10-18 15:48:10
1 = 14503
2 = 48186
= Successfully closed Session process: pid=14503 sid=4818
NOTE: If the options are not provided, then the getractime subcommand displays the time in a
common readable format.