Dell PowerEdge M1000e Reference Manual page 96

cfgSerialConsoleNoAuth (Read or Write)
Enables or disables the serial console login authentication.
Description
• 0 — (enables serial login authentication)
Legal Values
• 1 — (disables serial login authentication)
0
Default
cfgSerialConsoleCommand (Read or Write)
Specifies a serial command that is executed after a user logs in to the serial console interface.
Description
A string representing a valid serial command. For example, connect server-1.
Legal Values
Default <blank>
cfgSerialConsoleColumns (Read or Write)
Specifies the number of columns in the terminal window command line connected to the serial port. To take
Description
effect logout, and then log in again for the changes.
0–256
Legal Values
0 (equivalent to 80)
Default
cfgSerialHistorySize (Read or Write)
Specifies the maximum size of the serial history buffer.
Description
0–8192
Legal Values
Default 8192
cfgSerialSshEnable (Read or Write)
Enables or disables the secure shell (SSH) interface.
Description
Legal Values • 1 (TRUE)
• 0 (FALSE)
Default 1
Example
racadm getconfig -g cfgSerial
cfgSerialBaudRate=115200
cfgSerialConsoleEnable=1
cfgSerialConsoleQuitKey=^\
96
NOTE: The prompt counts as two characters.
NOTE: The terminal emulator must be configured with the line wrap mode ON, if a terminal emulator
is used.