Dell PowerEdge M1000e Reference Manual page 48

To run this subcommand, you must have the CMC Login User privilege.
racadm getpminfo
Synopsis
Input N/A
Example:
Displays power managemnt status information:
racadm getpminfo
[Real-Time Power Statistics]
System Input Power
Peak System Power
Peak System Power Start Time
Peak System Power Timestamp
Minimum System Power
Minimum System Power Start Time
Minimum System Power Timestamp
System Idle Power
System Potential Power
System Input Current Reading
[Real-Time Energy Statistics]
System Energy Consumption
System Energy Consumption Start Time
System Energy Consumption Timestamp
[System Power Status]
Chassis Power State
Overall Power Health
Redundancy
[System Power Policy Configuration]
System Input Power Cap
Redundancy Policy
Dynamic PSU Engagement Enabled
[Power Budgeting]
System Input Max Power Capacity
Input Redundancy Reserve
Input Power Allocated to Servers
48
= 1661 W (5667 BTU/h)
= 1916 W (6537 BTU/h)
= 09:19:27 11/26/2014
= 09:29:20 11/26/2014
= 35 W (119 BTU/h)
= 09:19:27 11/26/2014
= 09:54:00 11/26/2014
= 1661 W (5667 BTU/h)
= 3414 W (11649 BTU/h)
= 7.3 A
= 1.6 kWh
= 09:19:27 11/26/2014
= 10:31:42 11/26/2014
= ON
= OK
= No
= 16685 W (56931 BTU/h | 100%)
= None
= No
= 16685 W
= 0 W
= 1875 W