Setassettag; Setchassisname; Setflexaddr - Dell PowerEdge M1000e Reference Manual

• Set member name, member IP, member netmask, member gateway with existing group name, group IP,
group password selecting fabric B on server-1.
racadm setarraycfg -m server-1 -n cmc-col 192.168.1.233 255.255.255.0
192.168.1.0 -e 1 -g cmc-array-grp 192.168.1.10 <password> -f B
• Select different fabric type.
racadm setarraycfg -m server-3 -f A

setassettag

Description Sets the N-byte ASCII asset tag for the chassis.
To use this subcommand, you must have the Administrator privilege.
racadm setassettag -m module <assettag>
Synopsis
Input -m <module> — Specifies the module whose asset tag you want to set.
Legal value: chassis
You can obtain the same output if you do not include this option, as there is only one legal value.
<assettag> is a maximum of 64 non-extended ASCII characters.
•
Example racadm setassettag -m chassis 783839–33
•
racadm setassettag 783839–33
The asset tag was changed successfully.

setchassisname

Description Sets the name of the chassis in the LCD.
To run this subcommand, you must have the Administrator privilege.
racadm setchassisname <name>
Synopsis
racadm setchassisname dellchassis-1
Example
The chassis name was set successfully.

setflexaddr

Description Enables or disables FlexAddress on a particular slot or fabric.
To run this subcommand, you must have the Chassis Configuration Administrator privilege.
If the fabric type is determined to be InfiniBand, the operation is canceled and the command returns an error. If
the FlexAddress feature is not activated, the command returns an error.
66
NOTE: The special characters " (double quotation mark), ' (backward quotation mark), &
(ampersand), and \ (backward slash) are not supported for this subcommand.
NOTE: The special characters " (double quotation mark), ' (backward quotation mark), &
(ampersand), and \ (backward slash) are not supported for this subcommand.
NOTE: Chassis name is a maximum of 64 nonextended ASCII characters.