Character Condition - Panasonic LP-310 Operation Manual

3-5-3 Character Condition

On the character setting screen, set the shape of marking, size and position of character for the marking char-
acter string in the respective lines of the character setting.
1
3
Item
1. Condition No.
2. Set Line
3. Character Setting Part
4. Marking Shape
5. Font
6. Bold
7. Laser Power Revise
8. Scan Speed Revise
9. Char Cond. COPY
10. Char Cond. PASTE
11. Char Cond DELETE
If the setting lines are duplicated with those with the different condition No., the setting with the
smaller condition No. is effective.
CHECK
9 10
Description
Enables to set the character condition for each condition No.
Select the condition No. using the list box.
Specifies the lines which are set for the marking character
strings of the character setting screen. When inputting the
start line and ending line, the character conditions between
these two lines become effective.
Enables to set the size and position of the character. This
part changes the items to be set depending on the
selected marking shape.
Selects the design of the character string among "Straight
Line", "Tilt Angle" and "Fan Line Form".
Selects the font file to be used for displaying the marking
character string of each line by setting software and marking
the character string by the laser marker.
Enables to set the thickness of the character stroke.
Enables to set the correction against the laser power set
on the laser setting screen.
Enables to set the correction against the scan speed set
on the laser setting screen.
Copies whole character condition.
Pastes the whole character condition copied to the
condition with other condition No. Note that the set lie is
not copied.
Deletes whole character condition.
2
4
5
6
7
8
11
Setting Range
1 to 30
1 to 30 for both
start/end lines
Refer to 3-5-3 (1).
Select the shape
using the list box.
Select the font
using the list box.
0.00mm to 6.00mm
(Step: 0.01mm)
0 to 200%
50 to 200%
-
-
-
115