1-3
Installation
1-3-1 Installation Method
(1) Installation Method
Head
This head can be fixed from the bottom with M6 screw
at six locations.
• The inserting length of the screw shall be
10mm or less.
• The tightening torque shall be 2.0N•m or
CHECK
less.
Power Supply BOX
This power supply BOX can be fixed from the bottom
with M4 screw at four locations.
• The inserting length of the screw shall be
10mm or less. Note that the inserting
length of the screw on side surface of LP-
310-C shall be 5mm or less.
CHECK
• The tightening torque shall be 2.0N•m or
less.
36
30
255
57.5
200
70
12.5
35
140
4-M4
4-M4