Panasonic LP-310 Operation Manual page 158

Connecting Sample with External Devices
■
I/O Connector
•
When connecting to the external devices, the laser marker is not activated unless connecting
the + (positive) side of the external power supply to the I/O connectors No. 14
connecting the ON of the external power supply to the I/O connector No. 15
operating the laser marker, connect the external power supply.
•
When performing marking, connect the I/O connectors No. 4
OUT COM.
CHECK
When setting the state between No. 4 and No. 15 into OPEN, the laser radiation is activated, and
the marking becomes invalid.
•
When performing marking, connect the I/O connectors No. 1
INTERLOCK
is activated and the marking becomes invalid.
158
3. TRIG. IN
5∼8, 18∼ 20: D0∼D6
16. READY
14. IN COM.
15. OUT COM.
.
. When setting the state between No. 1 and No. 3 into OPEN, the emergency stop
PLC
Output
Output
Input
24V
0V
IN COM.
OUT COM.
LASER STOP
and No. 15
INTERLOCK COM. and No. 3
and
. For