Cautions in Handling
Handling the System
■
This product has been developed/produced for industrial use only.
When using the system, do not touch laser
beam with any part of body, papers, or
clothing, etc.
This product contains ZnSe (zinc selenide) in the lens mounted on the
laser radiation window. If the lens is damaged, care should be taken of the
following.
•
In order to prevent from swallowing of flakes or particles, inhaling them, or adhering them to skin, be
sure to wear glove, mask and protective goggles.
•
When disposing the lens, be sure to obey the disposing method prescribed in the regulations of user's
region/countryfully. Do not dispose the lens with general industrial waste.
•
Do not throw the lens into the fire.
•
Do not soak the lens in acid and alkali.
Never disassemble the product. It can
result in exposure to laser radiation or an
electric shock due to high voltage.
In the event a failure occurs in the system, contact us.
After the power supply of laser marker is turned off, laser safety
manager must remove the system key and keep it.
15
WARNING