Panasonic LP-310 Operation Manual page 210

Registration File
Marking FIle
Arbitrary String
Bold Character Line Width
Laser Power Revise
Scan Speed Revise
Mirror Inversion
Offset
Laser Power
Scan Speed
210
Term
This is the file to be saved in the PC. Max. 120 marking files
(sub files) that have been set are included in the file.
This is a set of max. 120 files (sub files) in which the conditions for
marking data by the laser marker are set. This set becomes the
registration file (parent file).
This is the string set through the communications from external
device indicating with ASCII code.
The thickness of the character stroke is almost determined
according to the laser power, scan speed, spot diameter, and
material of the object to be marked. If the user needs to perform
marking with a line width larger than the determined width, input
the desired line width of the character with this function.
In case of marking large character, it is better for the visibility
to set the thicker line width.
The laser power set in the laser setting screen can be corrected.
Since correction can be applied for each condition number, for
example, if large characters and small characters are mixed in
the data, data may be marked finely on the whole by adjusting
laser power to larger characters and reducing the laser power
to smaller characters by correction.
The scan speed set in the laser setting screen can be corrected.
By using this scan speed revise with the scan speed revise
together, the data may be marked finely on the whole.
The set data is automatically converted into a position symmetrical
with respect to the X- or Y-axis. There are two types for the mirror
inversion, vertical mirror inversion and horizontal mirror inversion.
The whole setting screen of each file can be shifted in the X,
Y, and θ directions. When the marking condition of one file is
Offset
used in wide-range, this function is available for shifting the
marking position in accordance with each condition.
Data of all the files transferred to the laser marker can be
shifted in the X and Y directions. In case of operating several
System Offset laser marker with one setting file, this function is available for
correcting the errors specific to the laser marker and errors
related to the installation.
The average power of the marking laser beam is indicated as
a rank ranging from 0.5 to 100. For the CO
power varies the pulse duty cycle.
If the scan speed is set with constant speed, the marked character
gets lighter as the laser power is lowered, and it gets darker as the
laser power is raised.
This indicates the max. scan speed of the marking laser
beam. This is equivalent to the maximum transfer speed of a
spot on the work for marking.
If the laser power is set with constant power, the marked character
gets lighter as the scan speed is raised, and it gets darker as the
scan speed is lowered.
Outline
laser, the laser
2