3-4
Function Setting
Here describes the function condition of the character string to be marked.
3-4-1 Function Setting Screen
The marking character is set and input on the "Function Setting" screen.
1 "View - "Set Func"
2 Click
.
The "Function Setting" dialog box is appeared by either selecting "1" method or clicking "2" button described
above.
In this dialog box, there are three tabs, "EXPIRY", "COUNTER", and "LOT" as shown in the following figure
and each function is set in this dialog box.
The content set in this dialog box is reflected to the character setting.
104