Recommended Tools; Table 1-3: Recommended Tools - Motorola SC 4812ET RF Hardware Installation Manual

Introduction
1
– continued

Recommended Tools

20
Table 1-3 lists tools recommended for installing RF and Power Cabinets.
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
SC 4812ET RF and Power Cabinet Hardware Installation Manual
TM

Table 1-3: Recommended Tools

Tool Description
Tin Snips
Wire Brush
Knife or Scissors
10 mm Nut Driver
19 mm (3/4") Open ended Torque Wrench (for N–type
connector)
110 Style Punch Block Termination Tool
Thomas & Betts TBM14 Hydraulic crimping tool with color
keyed crimp die set (or equivalent)
Drill Motor
18 mm (11/16") Masonry Drill Bit
Ratchet Handle with 19 mm (3/4") Socket (Deep Socket or
Ratchet Extension required).
Torque Driver (Torque Range: 5–135 N–m [4–100 ft–lbs])
with 19 mm (3/4") and 10 mm Socket
Torque wrench for SMA's Mountz Inc. MTBN2 (Part number
020314) with 5/16" open end head (Part number 020402).
Copper–based Conductive Grease (Berndy "Penetrox" or
equivalent).
DRAFT
Apr 2001
V02.03