Figure 1-7: Power Cabinet; Simplified Bts Cabling Diagram - Motorola SC 4812ET RF Hardware Installation Manual

Cabinet Cabling
– continued
Simplified BTS Cabling
Diagram
Figure 5-3: Overall Cable Diagram
5
J (1)
RF GPS ANTENNA
(IF APPLICAPLE)
I (See Note)
86
The overall cabling is shown in a simplified diagram Figure 5-3. Each
cable is identified with a capital letter followed by a number. The letter
refers to the cable label as described in Table 5-1, the number refers to
the quantity of cables to be installed. Refer to this diagram when
performing the cable connection procedures in the following tables.
RGPS ANTENNA
(IF APPLICAPLE)
C (1)
LFR ANTENNA
(IF APPLICAPLE)
K (1)
50 PIN
PUNCH
BLOCK
DRDC
RF Cabinet
SC 4812ET RF and Power Cabinet Hardware Installation Manual
TM
A (1)
B (1)
D (1)
E (3)
F (3)
H (1)
NOTE
The quantity of RF Antenna cables (I) is determined by
system configuration.
DRAFT
25 PIN
PUNCH
BLOCK
ACLC
Power Cabinet
H (1)
G (1)
Apr 2001
V04.03